If you encounter any problems, please contact my store customer service first.
If your kit has been used for some time and suddenly stops working, please do not return it. It may be that your motor plug is immersed in water. Unplug the plug for inspection and dry it. Plug it back in and it will work normally.
(1) You must ensure that the connecting machine between the motor and the controller is firmly connected.
(2) The installation distance of the pedal assist device is about 5mm.
(3) Ensure that the inner core of each plug is not damaged/broken/bent.
(4) Please do not change the display parameters at will, you can use it directly. Before we send the goods, the engineer will set the parameters for you.
Please operate according to our installation manual, or you can contact us, we will provide you with the installation video, but the machine needs to be connected correctly and firmly during the installation process to make the product work normally. If it is incorrect during the installation process, the product will not work properly.
After the installation is complete, you can check on the LCD display to see if the error code is displayed on the display interface.
If you can’t solve it, please don’t make a refund, please contact the customer service of our store! (If you return the goods directly to the Amazon warehouse, this product will not be sold again, and I cannot get compensation. Thank you for your understanding)
The package contains:
1)36V 500W Rear Roate Wheel x1 (without tire)
2) 48V/36V 22A controller x1
3) LCD3 Display x1
4)130X Thumb Throttle x1
5) Power Cut-off Brake Levers x1
6) PAS sensor x1
7) Motor extension cable x1
8)Torque arm x1
9)7-speed flywheel x1
10) Gift!!! controller bag x1
Make sure this fits by entering your model number.
1. We use Amazon logistics service, you can receive the goods faster. If there is a problem during use, please do not return it directly. First, contact our store customer service. Our factory has been open for 9 years and has rich experience. We will provide you with a solution that satisfies you.
2. Controller system: We use the Kunteng control system, please do not change any of the accessories at will, you can consult our store customer service if you have any questions. We use a Hall controller, which can start from scratch quickly and smoothly, and there is no pause when going uphill.
3. Description: Our products do not contain lithium batteries and inner and outer tires! This product is only suitable for snow bike with tire sizes 26*4.0.
4. Motor: Ebike conversion kit 36V500W brushless gear motor with a maximum speed of 32km/h. The opening of the rear fork is170mm, please make sure your rear fork is 170mm, otherwise it cannot be installed.
5. Installation: Using this product, you can easily convert ordinary fat bike into electric snow bike. This is hundreds of dollars cheaper than buying a new electric snow bike. It only takes 1-2 hours for one person to complete the modification. If you don’t know how to install the kit, please find a bicycle store for help, or a friend who can install it for help. Ensure that the parts are in good condition, so as not to cause the kit to fail to work.
6.KT-LCD3 Display.The Display battery percentage, speed, distance, power, PAS value and possible error codes for easy troubleshooting. The display package contains a manual.